10S2P 18650 42V 6.6A 280Wh (Aviation Plugs), swappable electric skateboard battery for Uditer S3/S3 PRO
- Aviation Plugs: This aviation connector plug for the battery connection is very tight and stable, will never be disconnected.
- The size of the MT30 is smaller than that of the MT60. Please ensure that the battery you want is compatible with the connector of the electric skateboard. If you're not completely sure, feel free to contact us at email@example.com. Include photos of both the battery's and the board's connectors for assistance
Just assemble the base on the front of the electric skateboard, and then manually screw the nut firmly, and you can assemble your handlebar.
How to install the camera to the camera mount?
You only need to fix the relevant accessories on the screws at the specified position.
Press and hold the switch button of the electric skateboard for 10 seconds. When the light on the switch button starts to flicker, turn on the remote control, and press the Power button and the Reverse button quickly at the same time. At this time, the remote control will vibrate once, indicating that your remote control is connected to the electric motor. The skateboard has established a connection. (This function will be set to OK when the skateboard leaves the factory, and no further operation is required in the future).
330 lbs for all models (However, please do not try to jump on the board or break it with additional strength).